UK - Basingstoke: Rugged Solutions & Mobility team: 01256 378208
UK - Telford: Gaming, IT hardware and Software team: +44 1256 378141
Contact sales via email on: rugged.admin@cidistribution.com

Arctic P8 PWM Cooling Fan - Case, Heatsink, Radiator - 1 x 80 mm - 1 - 23.4 CFM - 24.5 dB(A) Noise - Air Cooler - Fluid Dynamic Bearing - 4-pin - Rubber, Teflon, Steel

MPN Number :   ACFAN00149A

Manufacturer :  Arctic Cooling

Model No :   P8 PWM

images

Pre Order

General Information
ManufacturerArctic Cooling
Manufacturer Part NumberACFAN00149A
Manufacturer Website Addresshttp://www.arctic-cooling.com
Brand NameArctic
Product ModelP8 PWM
Product NameP8 PWM Pressure-Optimised 80 mm Fan With PWM
Marketing Information

OPTIMISED FOR STATIC PRESSURE

During the development of the new P8 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM is particularly suitable for use on heatsinks and radiators.

MAXIMUM QUIETNESS, MINIMUM VIBRATION

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

EXTENDED LIFE SPAN

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.

200 TO 1800 RPM REGULATED VIA PWM

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

HIGH QUALITY BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

TWO WAY INSTALLATION

  • Push warm air out of the case
  • Pull cool air into your case
Product TypeCooling Fan
Fan Information
Fan Bearing TypeFluid Dynamic Bearing
Fan Speed (rpm)3000
Air Flow23.4 CFM
Noise Levels24.5 dB(A)
Heatsink Information
Cooler TypeAir
Interfaces/Ports
Connectors4-pin
Physical Characteristics
Material
  • Rubber
  • Teflon Plate
  • Steel Shaft
Fan Diameter1 x 80 mm
Fan Height25 mm
Fan Width80 mm
Fan Depth80 mm
Weight (Approximate)81 g
Miscellaneous
Application/Usage
  • Case
  • Heatsink
  • Radiator
Warranty
Limited Warranty10 Year

Please Call 01952 954143 or
Email : sales@cidistribution.com

Basket