UK - Basingstoke: Rugged Solutions & Mobility team: 01256 378208
UK - Telford: Gaming, IT hardware and Software team: +44 1256 378141
Contact sales via email on: rugged.admin@cidistribution.com

Arctic P14 PWM PST Cooling Fan - Heatsink, Radiator, Case - 140 mm Maximum Fan Diameter - 1 x Fan(s) - 2061.5 L/min Maximum Airflow - 1700 rpm - 35.8 dB(A) Noise - Fluid Dynamic Bearing - 4-Pin - Neodymium Iron Boron (NdFeB)

MPN Number :   ACFAN00125A

Manufacturer :  Arctic Cooling

Model No :   P14 PWM PST

images

Pre Order

General Information
Manufacturer Arctic Cooling
Manufacturer Part Number ACFAN00125A
Manufacturer Website Address http://www.arctic-cooling.com
Brand Name Arctic
Product Model P14 PWM PST
Product Name Pressure-optimised 140 mm Fan with PWM PST
Marketing Information

OPTIMISED FOR STATIC PRESSURE

During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators.

MORE EFFICIENT TECHNOLOGY

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

MAXIMUM QUIETNESS, MINIMUM VIBRATION

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

EXTENDED LIFE SPAN

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.

200 TO 1700 RPM REGULATED VIA PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

HIGH QUALITY BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

TWO WAY INSTALLATION

- Push warm air out of the case
- Pull cool air into your case

Product Type Cooling Fan
Fan Information
Fan Bearing Type Fluid Dynamic Bearing
Fan Speed (Min) 200 rpm
Fan Speed (Max) 1700 rpm
Maximum Airflow 2061.5 L/min
Noise Levels 35.8 dB(A)
Interfaces/Ports
Connectors 4-Pin
Physical Characteristics
Material Neodymium Iron Boron (NdFeB) Rotor
Maximum Fan Diameter 140 mm
Height 27 mm
Width 140 mm
Weight (Approximate) 194 g
Miscellaneous
Application/Usage
  • Heatsink
  • Radiator
  • Case

Please Call 01952 954143 or
Email : sales@cidistribution.com

Basket